BSW
U1010 CONTROL UNIT (CAN)
SIDE RADAR LH : Description
CAN controller controls the communication of BSW communication signal and the error detection.
SIDE RADAR LH : DTC Logic
DTC DETECTION LOGIC
SIDE RADAR LH : Diagnosis Procedure
1. CHECK SELF-DIAGNOSIS RESULT
1.Turn the BSW system ON.
2.Perform "All DTC Reading" with CONSULT.
3.Check if the "U1010" is detected as the current malfunction in "Self Diagnostic Result" of "SIDE RADAR
LEFT".
Is "U1010" detected as the current malfunction?
YES- Replace the side radar LH. "Removal and Installation" Side Radar.
NO- INSPECTION END
SIDE RADAR RH : Description
CAN controller controls the communication of BSW communication signal and the error detection.
SIDE RADAR RH : DTC Logic
DTC DETECTION LOGIC
SIDE RADAR RH : Diagnosis Procedure
1. CHECK SELF-DIAGNOSIS RESULT
1.Turn the BSW system ON.
2.Perform "All DTC Reading" with CONSULT.
3.Check if the "U1010" is detected as the current malfunction in "Self Diagnostic Result" of "SIDE RADAR
RIGHT".
Is "U1010" detected as the current malfunction?
YES- Replace the side radar RH. "Removal and Installation" Side Radar.
NO- INSPECTION END
BSW CONTROL MODULE : Description
CAN controller controls the communication of CAN communication signal and BSW communication signal, and the error detection.
BSW CONTROL MODULE : DTC Logic
DTC DETECTION LOGIC
BSW CONTROL MODULE : Diagnosis Procedure
1. PERFORM DTC CONFIRMATION PROCEDURE
1.Turn the BSW system ON.
2.Perform "All DTC Reading" with CONSULT.
3.Check if the "U1010" is detected as the current malfunction in "Self Diagnostic Result" of "BSW".
Is "U1010" detected as the current malfunction?
YES- Replace the BSW control module. Refer to "Removal and Installation" Service and Repair.
NO- INSPECTION END