Front Camera

FRONT CAMERA

Removal and Installation


REMOVAL

1.Remove harness clip and connector clip from front camera bracket.
2.Remove front emblem. Refer to "Exploded View" Exploded View.
3.Remove front emblem mounting screws.
4.Remove front camera.

INSTALLATION

1.Install in the reverse order of removal.
2.Perform camera image calibration. Refer to "CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Special Repair Requirement" Special Repair Requirement.

CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.)
and replacing the around view monitor control unit.