With Navigation

AROUND VIEW MONITOR CONTROL UNIT

Removal and Installation


REMOVAL

1.Remove front seat (LH side). Refer to "Exploded View" Exploded View.
2.Remove floor carpet. Keep a service area.
3.Remove around view monitor control unit.

INSTALLATION

1.Install in the reverse order of removal.
2.Perform camera image calibration. Refer to "CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Work Procedure" Work Procedure.
3.Perform predictive course line center position adjustment. Refer to "PREDICTIVE COURSE LINE CENTER POSITION ADJUSTMENT : Work Procedure" With Navigation.

CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.)
and replacing the around view monitor control unit.