Base Audio

AV CONTROL UNIT

Removal and Installation


REMOVAL


CAUTION:
- Before replacing AV control unit, perform "Read/Write Configuration" to save or print current vehicle specification. For details, refer to "ADDITIONAL SERVICE WHEN REPLACING AV CONTROL
UNIT : Work Procedure".
- Remove battery terminal and AV control unit after a lapse of 30 seconds or more after turning the ignition switch OFF.
1.Remove display unit. Refer to "Exploded View" Base Audio
2.Remove AV control unit with a unified meter and A/C amp. as a single unit from the body.
3.Remove bracket screws, and then remove AV control unit.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
- Be sure to perform "Read/Write Configuration" when replacing AV control unit. For details, refer to
"CONFIGURATION (AV CONTROL UNIT) : Work Procedure" Base Audio.
- Since AV control unit connector and unified meter and A/C amp. connector have the same form, be careful not to insert them wrongly.