Description

INSPECTION AND ADJUSTMENT

ECM RE-COMMUNICATING FUNCTION : Description

Performing following procedure can automatically perform re-communication of ECM and BCM, but only when the ECM has been replaced with a new one (*1).
*1: New one means a virgin ECM which has never been energized on-board.
(In this step, initialization procedure by CONSULT is not necessary)
NOTE:
-When registering new Key IDs or replacing the ECM that is not brand new, follow the instruction of
CONSULT display.
-If multiple keys are attached to the key holder, separate them before work.
-Distinguish keys with unregistered key ID from those with registered ID.