ABS Warning Lamp

ABS WARNING LAMP

Description

�: ON -: OFF







Component Function Check


1. CHECK ABS WARNING LAMP OPERATION

Check that the lamp illuminates for approximately 1 second after the ignition switch is turned ON.
Is the inspection result normal?
YES- INSPECTION END
NO- Proceed to diagnosis procedure. Refer to "Diagnosis Procedure" .


Diagnosis Procedure


1. CHECK SELF-DIAGNOSIS

Perform self-diagnosis for "ABS" with CONSULT.
Is the inspection result normal?
YES- GO TO 2.
NO- Check items displayed by self-diagnosis.

2. CHECK COMBINATION METER

Check if the indication and operation of combination meter are normal. Refer to "Diagnosis Description" Reading and Clearing Diagnostic Trouble Codes.
Is the inspection result normal?
YES- Replace ABS actuator and electric unit (control unit).
NO- Repair or replace combination meter.