Diagnosis Procedure
HEATED SEAT SWITCH INDICATOR
DRIVER SIDE : Diagnosis Procedure
1. CHECK HEATED SEAT SWITCH INDICATOR GROUND CIRCUIT
1.Turn ignition switch OFF
2.Disconnect heated seat switch connector.
3.Check continuity between heated seat switch harness connector and ground.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace harness.
2. CHECK HEATED SEAT SWITCH
Check heated seat switch.
Refer to "DRIVER SIDE : Component Inspection" Component Inspection.
Is the inspection result normal?
YES- GO TO 3.
NO- Replace heated seat switch. Refer to "Removal and Installation" Removal and Installation.
3. CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to "Intermittent Incident" Intermittent Incident.
- INSPECTION END