Removal and Installation

POWER WINDOW MAIN SWITCH

Removal and Installation


REMOVAL






1.Remove the power window main switch finisher (2).
Refer to "Exploded View" Exploded View and "Removal and Installation".
2.Power window main switch (1) is removed from power window main switch finisher (2) using remover tool (A).

CAUTION:
Do not fold the pawl of power window main switch finisher.
NOTE:
The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH & RH).

INSTALLATION

Install in the reverse order of removal.
NOTE:
Power window main switch is exchanged or is detached it is necessary to do the initialization procedure.
Refer to "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement" Special Repair Requirement.