With Navigation

AV CONTROL UNIT

Removal and Installation


REMOVAL


CAUTION:
Before replacing AV control unit, perform "Read/Write Configuration" to save or print current vehicle specification. For details, refer to "ADDITIONAL SERVICE WHEN REPLACING AV CONTROL
UNIT : Work Procedure".
1.Remove display unit. Refer to "Exploded View" With Navigation
2.Remove AV control unit with a unified meter and A/C amp. as a single unit from the body.
3.Remove bracket screws, and then remove AV control unit.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
- Be sure to perform "Read/Write Configuration" when replacing AV control unit. For details, refer to
"CONFIGURATION (AV CONTROL UNIT) : Work Procedure" With Navigation.
- Since AV control unit connector and unified meter and A/C amp. connector have the same form, be careful not to insert them wrongly.