Removal and Installation

FLOOR TRIM

Removal and Installation


REMOVAL

1.Remove front seat (LH/RH). Refer to "Removal and Installation" Removal and Installation.
2.Remove rear seat cushion. Refer to "Removal and Installation" Removal and Installation.
3.Remove accelerator pedal pad. Refer to "Removal and Installation" Removal and Installation.





4.Disengage clip of floor hook (1) with remover tool (A).





5.Remove foot grille (LH/RH). Refer to "FOOT GRILLE : Removal and Installation" Foot Grille.
6.Remove front seat belt floor anchor bolt (LH/RH). Refer to "SEAT BELT RETRACTOR : Exploded View" Exploded View.
7.Remove center console assembly. Refer to "Removal and Installation" Removal and Installation.
8.Remove instrument lower cover, instrument driver lower panel, instrument assist lower panel and instrument side panel (LH/RH). Refer to "Removal and Installation" Removal and Installation.





9.Remove G-sensor (1). Refer to "Removal and Installation" Removal and Installation.
10.Remove diagnosis sensor unit (2). Refer to "Removal and Installation" Removal and Installation.
11.Remove console rear bracket (3). Refer to "Removal and Installation" Removal and Installation.
12.Remove floor harness mounting clamps (A).
13.Remove dash side finisher (LH/RH), front kicking plate inner (LH/RH) and body side welt (LH/RH). Refer to "Removal and Installation" Removal and Installation.
14.Remove floor trim mounting clips and fixing nuts.





15.Remove floor trim from floor trim fixing clips (A) and remove floor carpet.

INSTALLATION

Install in the reverse order of removal.