Auto Door Lock Operation Does Not Operate

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

Description

NOTE:
Before performing the diagnosis in the following procedure, check "Work Flow". Refer to "Work Flow" Work Flow.


Diagnosis Procedure


1. CHECK "AUTO LOCK SET" SETTING IN "WORK SUPPORT"

Check "AUTO LOCK SET" setting in "WORK SUPPORT".
Refer to "INTELLIGENT KEY : CONSULT Function (BCM INTELLIGENT KEY)" Intelligent Key.
Is the inspection result normal?
YES- GO TO 2.
NO- Set "AUTO LOCK SET" setting in "WORK SUPPORT".

2. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- GO TO 1.