Diagnosis Procedure

MIRROR SENSOR

PASSENGER SIDE : Diagnosis Procedure


1. CHECK DOOR MIRROR SENSOR (PASSENGER SIDE) POWER SUPPLY

1.Turn ignition switch OFF.
2.Disconnect door mirror (passenger side) connector.
3.Turn ignition switch ON.
4.Check voltage between door mirror (passenger side) harness connector and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- GO TO 2.

2. CHECK DOOR MIRROR (PASSENGER SIDE) SENSOR POWER SUPPLY CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect automatic drive positioner control unit connector.
3.Check continuity between automatic drive positioner control unit harness connector and door mirror (passenger side) harness connector.





4.Check continuity between automatic drive positioner control unit harness connector and ground.





Is the inspection result normal?
YES- Replace automatic driver positioner control unit. Refer to "Removal and Installation" Removal and Installation.
NO- Repair or replace harness or connector.

3. CHECK DOOR MIRROR (PASSENGER SIDE) SENSOR GROUND

1.Turn ignition switch OFF.
2.Disconnect automatic drive positioner control unit connector.
3.Check continuity between automatic drive positioner control unit harness connector and door mirror (passenger side) connector.





Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace harness or connector.

4. CHECK DOOR MIRROR (PASSENGER SIDE) SENSOR HARNESS CONTINUITY

1.Check continuity between automatic drive positioner control unit harness connector and door mirror (passenger side) harness connector.





2.Check continuity between automatic drive positioner control unit harness connector and ground.





Is the inspection result normal?
YES- Replace door mirror sensor. (Built in passenger side door mirror).
NO- Repair or replace harness or connector.