Trip A/B Reset Switch Signal Circuit

TRIP A/B RESET SWITCH SIGNAL CIRCUIT

Description

Transmits the trip A/B reset switch signals to the combination meter.


Diagnosis Procedure


1. CHECK TRIP A/B RESET SWITCH INPUT SIGNAL

1.Turn ignition switch ON.
2.Measure voltage between the combination meter harness connector terminals.





Is the inspection result normal?
YES- INSPECTION END
NO- GO TO 2.

2. CHECK TRIP A/B RESET SWITCH SIGNAL CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect the combination meter and meter control switch connectors.
3.Check continuity between combination meter harness connector and trip A/B reset switch harness connector.





4.Check continuity between combination meter harness connector and ground.





Is the inspection result normal?
YES- INSPECTION END
NO- Repair harness or connector.


Component Inspection


1. CHECK TRIP A/B RESET SWITCH UNIT

1.Turn ignition switch OFF.
2.Disconnect the trip A/B reset switch connector.
3.Check continuity between the trip A/B reset switch connector terminals.





Is inspection result normal?
YES- INSPECTION END
NO- Replace trip A/B reset switch.