P Position Warning Does Not Operate

P POSITION WARNING DOES NOT OPERATE

Description

NOTE:
- Before performing the diagnosis in the following procedure, check "Work Flow". Refer to "Work Flow" Work Flow.
- Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm the list above twice in order to ensure proper operation. Refer to "WARNING FUNCTION : System Description" Warning Function.
- Door lock function is normal.


Diagnosis Procedure


1. CHECK TRANSMISSION RANGE SWITCH

Check DTC for BCM.
Refer to "DTC Index" Testing and Inspection.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Refer to "Component Function Check" Intelligent Key Warning Buzzer.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CHECK BUZZER (COMBINATION METER)

Check buzzer (combination meter).
Refer to "Component Function Check" Buzzer (Combination Meter).
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. CHECK DOOR SWITCH

Check door switch (driver side).
Refer to "Component Function Check" Door Switch.
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to "DTC Logic" B2621 (instrument center).
Refer to "DTC Logic" B2623 (luggage room).
Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace the malfunctioning parts.

6. CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to "Component Function Check" Combination Meter Display Function.
Is the inspection result normal?
YES- GO TO 7.
NO- Repair or replace the malfunctioning parts.

7. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- GO TO 1.