Removal and Installation

PERSONAL LAMP

Removal and Installation


CAUTION:
Disconnect the battery negative terminal or remove the fuse.

REMOVAL

1.Remove the headlining assembly. Refer to "NORMAL ROOF : Exploded View" Exploded View.
2.Insert any appropriate tool into the gap between the lens. Remove the lens.





3.Press the both side pawls (A) to the arrow direction (black arrow).
Remove the personal lamp finisher.
4.Remove the personal lamp case from the headlining assembly.
NOTE:
Replace the personal lamp case as a set (right and left).

INSTALLATION

Install in the reverse order of removal.
NOTE:
The following is easier to install the personal lamp finisher.





- Press the personal lamp finisher to the headlining. Pull the personal lamp case pawl to the arrow direction (black arrow) with any appropriate tool.