Removal and Installation

SATELLITE SENSOR

Removal and Installation


WARNING:
- Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes or more.
- Never use the air tools or electric tools for servicing.

REMOVAL

1.Remove the front seat belt. Refer to "SEAT BELT RETRACTOR : Removal and Installation" Removal and Installation.
2.Remove the satellite sensor fixing nuts.
3.Disconnect the harness connector and then remove the satellite sensor.

CAUTION:





- Never impact the satellite sensor.


- Replace the satellite sensor if it has been dropped or sustained an impact.
- Replace the satellite sensor of deployed side air bag module and deployed curtain air bag module.

INSTALLATION

Note the following item, and install in the reverse order of removal.

CAUTION:
- Never use the old fixing nuts after removal, replace with the new nuts.
- Never damage the harness while installing.
- If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunctioning parts, reset the memory using self-diagnosis or CONSULT. Refer to "CONSULT Function" Supplemental Restraints.
- After the work is completed, check that no system malfunction is detected by air bag warning lamp.