Removal and Installation

TILT&TELESCOPIC SWITCH

Removal and Installation


REMOVAL


CAUTION:
When removing and installing, use shop cloths to protect parts from damage.





1.Remove the steering column mask (1).
Refer to "Removal and Installation" Removal and Installation.
2.Press pawls and remove tilt & telescopic switch (2) from the steering column mask (1).






INSTALLATION

Install in the reverse order of removal.

CAUTION:
Be sure to clump the harness to the right place.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. Refer to "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Description" Description.