B1023
Description
DTC B1023 FRONT PASSENGER AIR BAG OFF INDICATOR
The front passenger air bag off indicator is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit monitors the front passenger air bag off indicator and circuit for failures.
PART LOCATION
Refer to "Component Parts Location" Locations.
DTC Logic
DTC DETECTION LOGIC
With CONSULT
Without CONSULT
DTC CONFIRMATION PROCEDURE (With CONSULT)
1. INSPECTION START
Turn ignition switch ON.
- GO TO 2.
2. CHECK SELF-DIAG RESULT
Check for the DTC on CONSULT.
Is the DTC detected?
YES- Refer to "Diagnosis Procedure" .
NO- Inspection End.
DTC CONFIRMATION PROCEDURE (Without CONSULT)
NOTE:
SRS will not enter diagnosis mode if no malfunction is detected in user mode.
1. IGNITION SWITCH
Turn ignition switch ON.
Revision: March 20122013 Infiniti JX
- GO TO 2
2. IGNITION SWITCH
After air bag warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
- GO TO 3
3. WAIT TIME
Wait more than 3 seconds.
- GO TO 4
4. REPEAT STEPS
Repeat steps 1 to 3 twice.
- GO TO 5
5. IGNITION SWITCH
Turn ignition switch ON.
- GO TO 6
6. DIAGNOSTIC MODE
SRS system is now in diagnostic mode and AIR BAG warning lamp flashes. Refer to "Flash Code Index" Manufacturer Code Charts.
-END
Diagnosis Procedure
Recheck SRS after each replacement.
1. HARNESS CONNECTOR
Is there any visible damage to the connector?
YES or NO
YES- Replace the harness.
NO- GO TO 2
2. WIRING HARNESS
Is there any visible damage to the harness?
YES or NO
YES- Replace the harness.
NO- GO TO 3
3. FRONT PASSENGER AIR BAG OFF INDICATOR
Replace the front passenger air bag off indicator. Refer to "Removal and Installation Cluster Lid C" Removal and Installation - Cluster Lid C.
- GO TO 4
4. AIR BAG DIAGNOSIS SENSOR UNIT
Replace the air bag diagnosis sensor unit. Refer to "Removal and Installation" Removal and Installation.
- GO TO 5
5. RELATED HARNESS
Replace the related harness.
Revision: March 20122013 Infiniti JX
-END
Revision: March 20122013 Infiniti JX