B2470

Description

When fastening and unfastening seat belt or opening and closing door is repeated continuously for a short period of time, the system temporarily deactivates the retracting function of seat belt to prevent excessive heating. The system recovers automatically.


DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. SELF-DIAGNOSIS WITH PRE-CRASH SEAT BELT CONTROL UNIT

1.Turn ignition switch ON.
2.Check Self-diagnostic result with CONSULT.
Is DTC detected?
YES- Refer to "Diagnosis Procedure" .
NO- Inspection End.


Diagnosis Procedure


1. CHECK THE VEHICLE CONDITION WITH CONSULT DATA MONITOR

1.Check HEAT PROTC LH in DATA MONITOR with CONSULT.
2.Wait until OFF appears.
3.Perform the self-diagnosis result with CONSULT, after performing the check.
4.Touch ERASE.
5.Perform DTC Confirmation Procedure. Refer to "DTC Logic" .
Is DTC B2470 displayed again?
YES- GO TO 2.
NO- Inspection End.

2. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- Inspection End.
Revision: March 20122013 Infiniti JX