C1130

C1130 ENGINE SIGNAL

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. CHECK SELF-DIAGNOSTIC RESULT

With CONSULT.
1.Turn ignition switch OFF to ON.
2.Perform self-diagnostic result.
Is DTC C1130 detected?
YES- Proceed to diagnosis procedure. Refer to "Diagnosis Procedure" .
NO- Inspection End.


Diagnosis Procedure


1. CHECK SELF-DIAGNOSTIC RESULT FOR ENGINE SYSTEM

With CONSULT.
Perform self-diagnostic result. Refer to "CONSULT Function" Consult Function.
Are any ECM DTCs detected?
YES- Refer to "DTC Index" A L L Diagnostic Trouble Codes ( DTC ).
NO- GO TO 2.

2. CHECK SELF-DIAGNOSTIC RESULT FOR ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

With CONSULT.
1.Perform self-diagnostic result and erase DTCs.
2.Turn ignition switch OFF.
3.Start engine and drive vehicle for a short period of time.
4.Check that malfunction indicator lamp (MIL) turns OFF.
5.Stop vehicle and perform self-diagnostic result.
Is DTC C1130 detected?
YES- Replace ABS actuator and electric unit (control unit). Refer to "Removal and Installation" Removal and Installation.
NO- Check pin terminals and connection of connectors for abnormal conditions. Repair or replace malfunctioning components.
Revision: March 20122013 Infiniti JX