C1160

C1160 DECEL G SEN SET

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. CHECK SELF-DIAGNOSTIC RESULT

With CONSULT.
1.Turn ignition switch OFF to ON.
2.Perform self-diagnostic result.
Is DTC C1160 detected?
YES- Proceed to diagnosis procedure. Refer to "Diagnosis Procedure" .
NO- Inspection End.


Diagnosis Procedure


1. DECEL G SENSOR CALIBRATION

Perform decel G sensor calibration. Refer to "Work Procedure" Work Procedure.
- GO TO 2.

2. CHECK SELF-DIAGNOSTIC RESULT

With CONSULT.
Perform self-diagnostic result.
Is DTC C1160 detected?
YES- GO TO 3.
NO- Inspection End.

3. CHECK YAW RATE/SIDE/DECEL G SENSOR SYSTEM

Check yaw rate/side/decel G sensor system. Refer to "Diagnosis Procedure" C1145.
Is the inspection result normal?
YES- Replace ABS actuator and electric unit (control unit). Refer to "Removal and Installation" Removal and Installation.
NO- Repair or replace malfunctioning components.
Revision: March 20122013 Infiniti JX