C1716

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PERFORM SELF DIAGNOSTIC RESULT

With CONSULT
1.Check tire pressure for all wheels and adjust to the specified value. Refer to "Tire Air Pressure" [1][2]Specifications.
2.Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for
10 minutes.
3.Perform Self Diagnostic Result.
Is DTC C1716, C1717, C1718, or C1719 detected?
YES- Proceed to "Diagnosis Procedure" .
NO- Inspection End.


Diagnosis Procedure


1. TIRE PRESSURE SENSOR ID REGISTRATION

Perform tire pressure sensor ID registration. Refer to "Work Procedure" Work Procedure.
Can the tire pressure sensor ID registration be completed?
YES- GO TO 2.
NO- Replace applicable tire pressure sensor. Refer to "Removal and Installation" Removal and Installation.

2. CHECK TIRE PRESSURE SIGNAL

With CONSULT
1.Adjust tire pressure for all wheels to the specified value. Refer to "Tire Air Pressure" [1][2]Specifications.
2.Select Data Monitor from AIR PRESSURE MONITOR of BCM.
3.Check that the air pressures match the specified value.





Is the inspection result normal?
YES- Inspection End.
NO- Replace BCM. Refer to "Removal and Installation" Service and Repair.
Revision: March 20122013 Infiniti JX