Radar Stain

C1A16 RADAR STAIN

DTC Logic


DTC DETECTION LOGIC






NOTE:
DTC "C1A16" may be detected under the following conditions. (Explain to the customer about the difference between the contamination detection function and the indication when the malfunction is detected and tell them "This is not malfunction".)
- When contamination or foreign materials adhere to the ICC sensor area of the front bumper.
- When driving while it is snowing or when frost forms on the ICC sensor area of the front bumper.
- When ICC sensor area of the front bumper is temporarily fogged.


Diagnosis Procedure


1. CHECK ICC SENSOR SELF-DIAGNOSIS RESULTS

1.Perform "All DTC Reading" with CONSULT.
2.Check if the "C1A16" is detected as the current malfunction in "Self Diagnostic Result" of "LASER/
RADAR".
Is "C1A16"detected?
YES- Refer to "DTC Logic" ICC.
NO- GO TO 2.

2. CHECK ADAS CONTROL UNIT SELF-DIAGNOSIS RESULTS

1.Erase All self-diagnosis results with CONSULT.
2.Perform "All DTC Reading"
3.Check if the "C1A16" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".
Is "C1A16"detected?
YES- Replace ADAS control unit. Refer to "Removal and Installation" Removal and Installation.
NO- INSPECTION END
Revision: March 20122013 Infiniti JX