Driver Assistance System

C1B01 CAM AIMING INCMP

ADAS CONTROL UNIT : DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

1.Start the engine.
2.Operate the Blind Spot Intervention system and drive.

CAUTION:
Always drive safely.
3.Perform "All DTC Reading" with CONSULT.
4.Check if the "C1B01" is detected as the current malfunction in "Self Diagnostic Result" of "ICC/ADAS".
Is "C1B01" detected as the current malfunction?
YES- Refer to "ADAS CONTROL UNIT : Diagnosis Procedure" .
NO- Refer to "Intermittent Incident" Intermittent Incident.


ADAS CONTROL UNIT : Diagnosis Procedure


1. CHECK SELF-DIAGNOSIS RESULTS

Check if "C1B01" is detected in "Self Diagnostic Result" of "LANE CAMERA".
Is "C1B01" detected?
YES- Refer to "LANE CAMERA UNIT : DTC Logic"
NO- GO TO 2.

2. CHECK DATA MONITOR

1.Start the engine.
2.Check that "OK" is indicated for the value of "AIMING RESULT" in "DATA MONITOR" of "LANE CAMERA".
Is "OK" indicated?
YES- Replace the ADAS control unit. Refer to "Removal and Installation" Removal and Installation.
NO- Replace the lane camera unit. Refer to "Removal and Installation" Blind Spot Warning & Blind Spot Intervention.


LANE CAMERA UNIT : DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE

Revision: March 20122013 Infiniti JX

1. PERFORM DTC CONFIRMATION PROCEDURE

1.Start the engine.
2.Perform "All DTC Reading" with CONSULT.
3.Check if the "C1B01" is detected as the current malfunction in "Self Diagnostic Result" of "LANE CAMERA".
Is "C1B01" detected as the current malfunction?
YES- Refer to "LANE CAMERA UNIT : Diagnosis Procedure" .
NO- Refer to "Intermittent Incident" Intermittent Incident.


LANE CAMERA UNIT : Diagnosis Procedure


1. CAMERA AIMING ADJUSTMENT

1.Perform the camera aiming. Refer to "Description" Description.
2.Erase all self-diagnosis results with CONSULT.
3.Perform "All DTC Reading".
4.Check if the "C1B01" is detected in "Self Diagnostic Result" of "LANE CAMERA".
Is "C1B01" detected?
YES- Replace the lane camera unit. Refer to "Removal and Installation" Blind Spot Warning & Blind Spot Intervention.
NO- Inspection End.
Revision: March 20122013 Infiniti JX