Cruise Control System

C1F01 ACCELERATOR PEDAL ACTUATOR

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

1.Turn the ignition switch OFF.
2.Turn the ignition switch ON.
3.Slowly depress the accelerator pedal completely, and then release it.
4.Repeat step 3 several times.
5.Perform "All DTC Reading" with CONSULT.
6.Check if the DTC "C1F01" is detected as the current malfunction on the self-diagnosis results of "ICC/
ADAS".
Is "C1F01" detected as the current malfunction?
YES- Refer to "Diagnosis Procedure" .
NO- Refer to "Intermittent Incident" Intermittent Incident.


Diagnosis Procedure


1. CHECK ADAS CONTROL UNIT SELF-DIAGNOSIS RESULTS

Check if "U1000" is detected other than "C1F01" in "Self Diagnostic Result" of "ICC/ADAS".
Is "U1000" detected?
YES- Perform the CAN communication system inspection. Repair or replace the malfunctioning parts.
Refer to "ADAS CONTROL UNIT : DTC Logic" Cruise Control.
NO- GO TO 2.

2. CHECK ACCELERATOR PEDAL ACTUATOR SELF-DIAGNOSIS RESULTS

Check if "C1F01" is detected in "Self Diagnostic Result" of "ACCELE PEDAL ACT".
Is "C1F01" detected?
YES- Refer to "ACCELERATOR PEDAL ACTUATOR : DTC Logic" C1F01.
NO- Replace the ADAS control unit. Refer to "Removal and Installation" Removal and Installation.
Revision: March 20122013 Infiniti JX