Cruise Control System

C1F02 ACCELERATOR PEDAL ACTUATOR

DTC Logic


DTC DETECTION LOGIC







1. PERFORM DTC CONFIRMATION PROCEDURE

1.Start the engine.
2.Turn the DCA system ON.
3.Perform "All DTC Reading" with CONSULT.
4.Check if the "C1F02" is detected as the current malfunction on the self-diagnosis results of "ICC/ADAS".
Is "C1F02" detected as the current malfunction?
YES- Refer to "Diagnosis Procedure" .
NO- Refer to "Intermittent Incident" Intermittent Incident.


Diagnosis Procedure


1. CHECK ADAS CONTROL UNIT SELF-DIAGNOSIS RESULTS

Check if "U1000" is detected other than "C1F02" in "Self Diagnostic Result" of "ICC/ADAS".
Is "U1000" detected?
YES- Perform the CAN communication system inspection. Repair or replace the malfunctioning parts.
Refer to "ADAS CONTROL UNIT : DTC Logic" Cruise Control.
NO- GO TO 2.

2. CHECK ACCELERATOR PEDAL ACTUATOR SELF-DIAGNOSIS RESULTS

Check if "C1F02" is detected in "Self Diagnostic Result" of "ACCELE PEDAL ACT".
Is "C1F02" detected?
YES- Refer to "ACCELERATOR PEDAL ACTUATOR : DTC Logic" C1F01.
NO- Replace the ADAS control unit. Refer to "Removal and Installation" Removal and Installation.
Revision: March 20122013 Infiniti JX