Driver Assistance System

C1F02 ACCELERATOR PEDAL ACTUATOR

ADAS CONTROL UNIT : DTC Logic


DTC DETECTION LOGIC







1. PERFORM DTC CONFIRMATION PROCEDURE

1.Start the engine.
2.Turn the DCA system ON.
3.Perform "All DTC Reading" with CONSULT.
4.Check if the "C1F02" is detected as the current malfunction on the self-diagnosis results of "ICC/ADAS".
Is "C1F02" detected as the current malfunction?
YES- Refer to "ADAS CONTROL UNIT : Diagnosis Procedure" .
NO- Refer to "Intermittent Incident" Intermittent Incident.


ADAS CONTROL UNIT : Diagnosis Procedure


1. CHECK ADAS CONTROL UNIT SELF-DIAGNOSIS RESULTS

Check if "U1000" is detected other than "C1F02" in "Self Diagnostic Result" of "ICC/ADAS".
Is "U1000" detected?
YES- Perform the CAN communication system inspection. Repair or replace the malfunctioning parts.
Refer to "ADAS CONTROL UNIT : DTC Logic" DCA.
NO- GO TO 2.

2. CHECK ACCELERATOR PEDAL ACTUATOR SELF-DIAGNOSIS RESULTS

Check if "C1F02" is detected in "Self Diagnostic Result" of "ACCELE PEDAL ACT".
Is "C1F02" detected?
YES- Refer to "ACCELERATOR PEDAL ACTUATOR : DTC Logic" .
NO- Replace the ADAS control unit. Refer to "Removal and Installation" Removal and Installation.


ACCELERATOR PEDAL ACTUATOR : DTC Logic


DTC DETECTION LOGIC








ACCELERATOR PEDAL ACTUATOR : Diagnosis Procedure


1. PERFORM DTC CONFIRMATION PROCEDURE

1.Start the engine.
2.Turn the DCA system ON.
3.Perform "All DTC Reading" with CONSULT.
4.Check if the "C1F02" is detected as the current malfunction on the self-diagnosis results of "ACCELE
PEDAL ACT" or "ICC/ADAS"
Is "C1F02" detected as the current malfunction?
Revision: March 20122013 Infiniti JX
YES- Replace the accelerator pedal assembly. Refer to "MODELS WITH DISTANCE CONTROL ASSIST SYSTEM : Removal and Installation" Removal and Installation.
NO- INSPECTION END
Revision: March 20122013 Infiniti JX