STRG Angl Cal

Description

Inputs the steering calibration incomplete signal from steering angle sensor via CAN communication.


DTC Logic


DTC DETECTION LOGIC

NOTE:
If DTC U0428 is displayed with DTC U0126, first perform the trouble diagnosis for DTC U0126. Refer to SBC27, "Diagnosis Procedure".






DTC CONFIRMATION PROCEDURE


1. SELF-DIAGNOSIS WITH PRE-CRASH SEAT BELT CONTROL UNIT

1.Turn ignition switch ON.
2.Check Self-diagnostic result with CONSULT.
Is DTC detected?
YES- Refer to "Diagnosis Procedure" .
NO- Inspection End.


Diagnosis Procedure


1. CHECK DTC WITH ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

Check Self-diagnostic result for ABS with CONSULT. Refer to "CONSULT Function" Scan Tool Testing and Procedures.
Is DTC detected?
YES- Repair or replace malfunctioning parts.
NO- GO TO 2.

2. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- Inspection End.
Revision: March 20122013 Infiniti JX