Brake Control System

U1000 CAN COMM CIRCUIT

Description

CAN communication allows a high rate of information transmission through the two communication lines (CAN-H line and CAN-L line) connecting various control units in the system. Each control unit transmits/
receives data but selectively reads required data only.


DTC Logic


DTC DETECTION LOGIC








Diagnosis Procedure


1. CHECK SELF-DIAGNOSTIC RESULT

With CONSULT.
1.Turn ignition switch ON.
2.Perform self-diagnostic result.
Is DTC U1000 detected?
YES- Proceed to diagnosis procedure. Refer to "Trouble Diagnosis Flow Chart" Trouble Diagnosis Flow Chart.
NO- Refer to "Intermittent Incident" Intermittent Incident.
Revision: March 20122013 Infiniti JX