CVT RE0F09B

U1010 CONTROL UNIT (CAN)

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PRECONDITIONING

If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
- GO TO 2.

2. CHECK DTC DETECTION

With CONSULT
1.Start the engine.
2.Maintain the idling conditions for 6 seconds or more.
3.Check DTC.
Is "U1010" detected?
YES- Go to "Diagnosis Procedure" .
NO- INSPECTION END


Diagnosis Procedure


1. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
Is the inspection result normal?
YES- Replace the TCM. Refer to "Removal and Installation" Removal and Installation.
NO- Repair or replace damaged parts.
Revision: March 20122013 Infiniti JX