Hazard Function

HAZARD FUNCTION

Component Function Check


1. CHECK FUNCTION

1.Select "INTELLIGENT KEY" of "BCM" using CONSULT.
2.Select "FLASHER" in "ACTIVE TEST" mode.
3.Touch "LH" or "RH" to check that it works normally.
Is the inspection result normal?
YES- Hazard warning lamp circuit is OK.
NO- Refer to "Diagnosis Procedure" .


Diagnosis Procedure


1. CHECK HAZARD SWITCH CIRCUIT

Refer to "Component Function Check" Hazard Switch.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- Inspection End.
Revision: March 20122013 Infiniti JX