BCI

SIDE RADAR

Removal and Installation


REMOVAL AND INSTALLATION

Removal
1.Remove the rear bumper fascia assembly. Refer to "Removal and Installation" Removal and Installation.
2.Disconnect the harness connector (1) (3) from the side radar (RH or LH) as necessary.





NOTE:
This illustration is an example.
3.Remove nuts to remove the side radar (RH or LH) as necessary.
Installation
Revision: March 20122013 Infiniti JX
Installation is in the reverse order of removal.

CAUTION:
Do not use the side radar if the lens has flaws.
NOTE:
- Always lock the side radar connector (2).
- Do not touch the side radar lens and keep lens area clean.
Revision: March 20122013 Infiniti JX