Without Surround Sound

COMPOSITE IMAGE SIGNAL CIRCUIT (AV CONTROL UNIT TO VIDEO DISTRIBUTOR)

Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram" Bose Audio.

1. CHECK COMPOSITE IMAGE SIGNAL CIRCUIT CONTINUITY

1.Turn ignition switch OFF.
2.Disconnect AV control unit connector M125 and video distributor connector B25.
3.Check continuity between AV control unit connector M125 and video distributor connector B25.





4.Check continuity between AV control unit connector M125 and ground.





Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace harness or connectors.

2. CHECK COMPOSITE IMAGE SIGNAL

1.Connect AV control unit connector M125 and video distributor connector B25.
2.Turn ignition switch ON.
3.Check signal between video distributor connector B25 and ground.





Is the inspection result normal?
YES- Replace video distributor. Refer to "Removal and Installation" Without Surround Sound.
NO- Replace AV control unit. Refer to "Removal and Installation AV Control Unit" Without Surround Sound.
Revision: March 20122013 Infiniti JX