RGB Area (YS) Signal Circuit

RGB AREA (YS) SIGNAL CIRCUIT

Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram" Base Audio.

1. CHECK RGB AREA (YS) SIGNAL CIRCUIT CONTINUITY

1.Turn ignition switch OFF.
2.Disconnect AV control unit connector M45 and display unit connector.
3.Check continuity between AV control unit connector M45 terminal 60 and display unit connector M93 terminal 9.





4.Check continuity between AV control unit connector M45 terminal 60 and ground.





Is inspection result normal?
YES- GO TO 2.
NO- Repair or replace harness or connectors.

2. CHECK RGB AREA (YS) SIGNAL

1.Connect AV control unit connector M45 and display unit connector.
2.Turn ignition switch ON.
3.Check signal between display unit connector M93 terminal 9 and ground.





Is inspection result normal?
YES- Replace display unit. Refer to "Removal and Installation" Base Audio.
NO- Replace AV control unit. Refer to "Removal and Installation AV Control Unit" Base Audio.
Revision: March 20122013 Infiniti JX