Base Audio

INSPECTION AND ADJUSTMENT

CONFIGURATION (AV CONTROL UNIT) : Work Procedure


1. WRITING MODE SELECTION

CONSULT
Select "Reprogramming, Configuration" of AV control unit.
When writing saved data-GO TO 2.
When writing manually-GO TO 3.

2. PERFORM "SAVED DATA LIST"

CONSULT
Automatically "Operation Log Selection" window will display if "Before Replace ECU" was performed. Select applicable file from the "Save Data List" and press "Confirm".
- Work End.

3. PERFORM "AFTER REPLACE ECU" OR "MANUAL CONFIGURATION"

CONSULT
1.Select "After Replace ECU" or "Manual Configuration".
2.Identify the correct model and configuration list. Refer to "CONFIGURATION (AV CONTROL UNIT) : Configuration List" Base Audio.
3.Confirm and/or change setting value for each item.

CAUTION:
Thoroughly read and understand the vehicle specification. ECU control may not operate normally if the setting is not correct.
4.Select "Next".

CAUTION:
Make sure to select "Next", confirm each setting value and press "OK" even if the indicated configuration of brand new AV control unit is same as the desirable configuration. If not, configuration which is set automatically by selecting vehicle model can not be memorized.
5.When "Completed", select "End".
- GO TO 4.

4. OPERATION CHECK

Confirm that each function controlled by AV control unit operates normally.
Revision: March 20122013 Infiniti JX
- Work End.