Removal and Installation

FRONT SUSPENSION MEMBER

Removal and Installation


REMOVAL

1.Remove the wheels and tires using power tool. Refer to "Adjustment" Service and Repair.
2.Remove the engine and transmission with the front suspension member. Refer to "2WD : Removal and Installation" Removal and Installation (2WD) or "AWD : Removal and Installation" Removal and Installation (AWD).
- Engine, transmission and suspension member must be removed as an assembly.
3.Lift engine and transmission off of suspension member.





4.Remove the steering knuckle (1). Refer to "Removal and Installation" Front Suspension.
Revision: March 20122013 Infiniti JX





5.Remove the transverse links (1) and stabilizer bar (2). Refer to
"Removal and Installation" Removal and Installation






6.Remove the steering gear assembly (1) and hydraulic lines.
Refer to "Exploded View" Exploded View.

INSTALLATION

Installation is in the reverse order of removal.
- Refer to "Exploded View" Exploded View for tightening torque.
- After installation, perform final tightening of each part under unladen conditions with tires on ground. Check wheel alignment. Refer to "Inspection and Adjustment" Component Tests and General Diagnostics.