Glove Compartment: Service and Repair

GLOVE BOX ASSEMBLY

Removal and Installation


REMOVAL

1.Remove the instrument side finisher RH using a suitable tool.

CAUTION:
Apply protective tape around the suitable tool to protect components from damage.
2.Remove the glove box assembly lower screws.
3.Open the glove box lid, then remove the glove box assembly upper screws.
4.Disconnect the harness connectors from the glove box assembly, then remove the glove box assembly.

INSTALLATION

Installation is in the reverse order of removal.
Revision: March 20122013 Infiniti JX