Auto Door Lock Operation Does Not Operate

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK "AUTO LOCK SET" SETTING IN "WORK SUPPORT"

1.Select "INTELLIGENT KEY" of "BCM" using CONSULT.
2.Select "AUTO LOCK SET" in "WORK SUPPORT" mode.
3.Check "AUTO LOCK SET" setting in "WORK SUPPORT".
Refer to "INTELLIGENT KEY : CONSULT Function (BCM INTELLIGENT KEY)" Intelligent Key.
Is the inspection result normal?
YES- GO TO 2.
NO- Set "MODE 2", "MODE 3", "MODE 4", "MODE 5", "MODE 6" or "MODE 7" in "AUTO LOCK SET".

2. REPLACE BCM

- Replace BCM. Refer to "Removal and Installation" Service and Repair.
- Confirm the operation after replacement.
Is the result normal?
YES- Inspection End.
NO- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
Revision: March 20122013 Infiniti JX