Automatic Back Door Anti-Pinch Function Does Not Operate

AUTOMATIC BACK DOOR ANTI-PINCH FUNCTION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK POWER SUPPLY AND GROUND CIRCUIT

Check automatic back door control module power supply and ground circuit.
Refer to "Diagnosis Procedure" B2401.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. CHECK TOUCH SENSOR LH

Check touch sensor LH.
Refer to "LH : Component Function Check" Component Function Check.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CHECK TOUCH SENSOR RH

Check touch sensor RH.
Refer to "RH : Component Function Check" Component Function Check.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. REPLACE AUTOMATIC BACK DOOR CONTROL MODULE

1.Replace automatic back door control module. Refer to "Removal and Installation" Service and Repair.
2.Confirm the operation after replacement.
Is the result normal?
YES- Inspection End.
NO- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
Revision: March 20122013 Infiniti JX