Scan Tool Testing and Procedures

DIAGNOSIS SYSTEM (ADAS CONTROL UNIT)

CONSULT Function (ICC/ADAS)

APPLICATION ITEMS

CONSULT performs the following functions via CAN communication using ADAS control unit.

SELF DIAGNOSTIC RESULT

Refer to "DTC Index" A L L Diagnostic Trouble Codes ( DTC ).

DATA MONITOR

Revision: March 20122013 Infiniti JX

Revision: March 20122013 Infiniti JX

WORK SUPPORT

NOTE:
- Causes of the maximum five cancellations (system cancel) are displayed.
- The displayed cancellation causes display the number of the ignition switch ON/OFF up to 254. It is fixed to
254 if it is over 254. It returns to 0 when the same cancellation cause is detected again.
Display Items for The Cause of Automatic Cancellation 1

Revision: March 20122013 Infiniti JX

Display Items for The Cause of Automatic Cancellation 2

Revision: March 20122013 Infiniti JX

Display Items for The Cause of Automatic Cancellation 3

Revision: March 20122013 Infiniti JX

ACTIVE TEST

CAUTION:
- Never perform "Active Test" while driving the vehicle.
- The "Active Test" cannot be performed when the following systems warning lamp is illuminated.
- ICC system warning lamp
- Lane departure warning lamp
- Blind Spot Warning/Blind Spot Intervention warning lamp
- IBA OFF indicator lamp (IBA system ON)
- Shift the selector lever to "P" position, and then perform the test.

BRAKE ACTUATOR
NOTE:
The test can be performed only when the engine is running.
Revision: March 20122013 Infiniti JX

NOTE:
The test is finished in 10 seconds after starting

ICC BUZZER

METER LAMP
NOTE:
The test can be performed only when the engine is running.

STOP LAMP

Revision: March 20122013 Infiniti JX
ACTIVE PEDAL

CAUTION:
- Shift the selector lever to "P" position, and then perform the test.
- Never depress the accelerator pedal excessively. (The engine speed may rise unexpectedly when finishing the test.)
NOTE:
- Depress the accelerator pedal to check when performing the test.
- The test can be performed only when the engine is running.