Intake Valve Timing Control Solenoid Valve (LH)

INTAKE VALVE TIMING CONTROL

Intake Valve Timing Control Solenoid Valve (LH)


REMOVAL

1.Remove the front air duct. Refer to "Exploded View" Exploded View.
2.Remove coolant reservoir hose and tank.
3.Remove the washer fluid reservoir filler neck. Refer to "Removal and Installation" Removal and Installation.
4.Disconnect intake valve timing control solenoid valve harness connector.
5.Remove intake valve timing control solenoid valve and O-ring from intake valve timing control cover.

INSTALLATION

Revision: March 20122013 Infiniti JX
Installation is in the reverse order of removal.

CAUTION:
- Do not reuse O-ring.
- Replace the O-ring for the intake valve timing control solenoid valve with a new one, then lubricate
O-ring with engine oil before installing.


Intake valve timing control solenoid valve bolt: 9.6 Nm (0.98 kg-m, 85 in-lb)