Operation CHARM: Car repair manuals for everyone.
Home >> Infiniti Truck >> 2013 >> JX35 AWD V6-3.5L (VQ35DE) >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Variable Valve Timing >> Variable Valve Timing Solenoid >> Service and Repair >> Intake Valve Timing Control Solenoid Valve (RH)

Intake Valve Timing Control Solenoid Valve (RH)




INTAKE VALVE TIMING CONTROL

Intake Valve Timing Control Solenoid Valve (RH)


REMOVAL

1.Remove the front air duct. Refer to "Exploded View" Exploded View.
2.Remove the engine room cover. Refer to "Exploded View" Engine Room Cover.
3.Remove coolant reservoir hose and tank.
4.Remove the washer fluid reservoir filler neck. Refer to "Removal and Installation" Removal and Installation.
5.Remove electric power steering oil pump and bracket. Refer to "Removal and Installation" Removal and Installation.
6.Support engine using suitable tool.
7.Remove upper engine mount and bracket. Refer to "2WD : Exploded View" Exploded View.
8.Disconnect intake valve timing control solenoid valve harness connector.
9.Remove intake valve timing control solenoid valve and O-ring from intake valve timing control cover.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Do not reuse O-rings.
- Replace the O-ring for the intake valve timing control solenoid valve with a new one, then lubricate
O-ring with engine oil before installing.


Intake valve timing control solenoid valve bolt: 9.6 Nm (0.98 kg-m, 85 in-lb)
Revision: March 20122013 Infiniti JX
pro multis · About Operation CHARM