Fog/Driving Lamp: Adjustments

FRONT FOG LAMP AIMING ADJUSTMENT

Aiming Adjustment

NOTE:
Check the following conditions before performing the aiming adjustment.
- Keep all tires inflated to correct pressure.
- Place vehicle on level ground.
- See that vehicle is unloaded (except for full levels of coolant, engine oil and fuel, and spare tire, jack, and tools). Have the driver or equivalent weight placed in driver seat.
- When performing adjustment, if necessary, cover the headlamps and opposite fog lamp.





1.Set the distance between the screen and the center of the fog lamp lens as shown.
(1) Aiming screen or a matte white surface (2) 7.62 m (25 ft)
(3) Floor to center of fog lamp lens (4) Floor
2.Turn front fog lamps ON.





3.Access adjustment screw from underneath front bumper. Use a
Phillips screwdriver to adjust. Turn screw clockwise to raise pattern and counterclockwise to lower pattern. Adjust front fog lamps using adjusting screw so that the top edge of the high intensity zone is 100 mm (4 in) below the height of the fog lamp centers as shown (1) Vertical center line of left fog lamp (2) Lamp center above ground (3) 100 mm (4 in) (0.76 deg) below lamp center above ground (4) Left fog lamp high intensity area (5) Vehicle center axis (6) Vertical center line of right fog lamp (7) Right fog lamp high intensity area





Revision: March 20122013 Infiniti JX