Harness Locations

HARNESS

Harness Layout

HOW TO READ HARNESS LAYOUT

The following Harness Layouts use a map style grid to help locate connectors on the drawings:
- Main Harness 1, Main Harness 2, Console Sub-harness, Console
Switch Sub-harness and Yaw Rate Sensor Sub-harness
- Engine Room Harness
- Engine Room Harness (Passenger Compartment)
- Front End Module Harness, Front Fog Lamp Sub-harness and
Front Combination Lamp Sub-harness
- Engine Control Harness and Knock Sensor Sub-harness
- Body Harness, Front Seat LH Harness, Body No.3 Harness, Body
No.3 Sub-harness, Trailer Relay Sub Harness and Chassis Harness
- Body No. 2 Harness and Front Seat RH Harness
- Room Lamp Harness and Room Lamp Sub-harness
- Back Door LH Harness and Back Door RH Harness
To use the grid reference
1.Find the desired connector number on the connector list.
2.Find the grid reference.
3.On the drawing, find the crossing of the grid reference letter column and number row.
4.Find the connector number in the crossing zone.
5.Follow the line (if used) to the connector.

OUTLINE