Without Distance Control Assist System

ACCELERATOR CONTROL SYSTEM

MODELS WITHOUT DISTANCE CONTROL ASSIST SYSTEM : Removal and Installation


REMOVAL

1.Remove three accelerator pedal assembly nuts.





2.Disconnect harness connector (A) from the accelerator pedal assembly (1).
: Front
3.Remove the accelerator pedal assembly from vehicle.

CAUTION:
- Do not disassemble accelerator pedal assembly.
- Do not drop or impact accelerator pedal assembly.
- Do not expose accelerator pedal assembly to water.

INSTALLATION

Installation is in the reverse order of removal.
NOTE:
For inspection, refer to "MODELS WITHOUT DISTANCE CONTROL ASSIST SYSTEM : Inspection" Without Distance Control Assist System.
Revision: March 20122013 Infiniti JX