CAN Gateway

DIAGNOSIS SYSTEM (CAN GATEWAY)

CONSULT Function


APPLICATION ITEM

CONSULT performs the following functions via CAN communication with CAN gateway.






ECU IDENTIFICATION

The CAN gateway part number is displayed.

SELF DIAGNOSTIC RESULT

Refer to "DTC Index" A L L Diagnostic Trouble Codes ( DTC ).
- When "CRNT" is displayed on self-diagnosis result
- The system is presently malfunctioning.
- When "PAST" is displayed on self-diagnosis result
- System malfunction in the past is detected, but the system is presently normal.
Freeze Frame Data (FFD)
When DTC is detected, a vehicle state shown below is recorded and displayed on CONSULT.






CAN DIAG SUPPORT MONITOR

The results of transmit/receive diagnosis of CAN communication can be read.

CONFIGURATION







CAUTION:
Follow the instructions listed below. Failure to do this may cause malfunctions to the CAN gateway.:
- When replacing CAN gateway, you must perform "Read / Write Configuration" or "Manual Configuration" with CONSULT.
- Complete the procedure of "Read / Write Configuration" or "Manual Configuration" in order.
- If you set incorrect "Read / Write Configuration" or "Manual Configuration", incidents might occur.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
- Never perform "Read / Write Configuration" or "Manual Configuration" except for new CAN gateway.
Revision: March 20122013 Infiniti JX