Engine Controls - MIL ON/DTC's P2097/P2099 Set: Overview
Classification: EC12-020Reference: ITB12-056
Date: September 6, 2012
2013 JX35; MIL ON WITH DTC P2097 / P2099
APPLIED VEHICLES: 2013 JX35 (L50)
IF YOU CONFIRM
MIL 'ON' with DTC P2097 and/or P2099 (post catalyst fuel trim system too rich bank 1 / bank 2) stored,
ACTION
1. Refer to step 6 in the SERVICE PROCEDURE to confirm this bulletin applies to the vehicle you are working on.
2. If this bulletin applies, reprogram the ECM and replace the appropriate A/F sensor(s).
^ If P2097 is stored, replace Bank 1 A/F sensor (bank 1 is toward rear of vehicle).
^ If P2099 is stored, replace Bank 2 A/F sensor (bank 2 is toward front of vehicle).
^ If P2097 and P2099 are stored, replace both A/F sensors
IMPORTANT:
The purpose of "ACTION" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service Procedure as it contains information that is essential to successfully
completing this repair.
PARTS INFORMATION
CLAIMS INFORMATION