Removal and Installation

YAW RATE/SIDE/DECEL G SENSOR

Removal and Installation


REMOVAL


CAUTION:
Do not drop, strike or use power tools on the yaw rate/side/decel G sensor because it is sensitive to the impact.
1.Remove the side stay cover from the center console assembly. Refer to "Exploded View" Exploded View.
2.Disconnect the harness connector.
3.Remove the nuts.
4.Remove yaw rate/side/decel G sensor.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Do not drop, strike or use power tools on the yaw rate/side/decel G sensor because it is sensitive to the impact.
- Perform calibration of the yaw rate/side/decel G sensor. Refer to "Work Procedure" Work Procedure.
Revision: March 20122013 Infiniti JX