Cabin Temperature Sensor / Switch: Service and Repair

IN-VEHICLE SENSOR

Removal and Installation


REMOVAL

1.Remove instrument lower panel LH. Refer to "Removal and Installation" Instrument Lower Panel LH.
2.Disconnect the aspirator hose from the in-vehicle sensor.
3.Disconnect the harness connector from the in-vehicle sensor.





4.Remove the in-vehicle sensor screw (A), then remove in-vehicle sensor (1).

INSTALLATION

Installation is in the reverse order of removal.
- Make sure that the aspirator hose is securely attached to the in-vehicle sensor when installing the instrument lower panel LH.
Revision: March 20122013 Infiniti JX