Removal and Installation

REFRIGERANT PRESSURE SENSOR

Removal and Installation


REMOVAL

1.Discharge the refrigerant. Refer to "Recycle Refrigerant" Recycle Refrigerant.
2.Remove the radiator core support upper cover. Refer to "Exploded View" Exploded View.
3.Disconnect the harness connector from the refrigerant pressure sensor.
4.Remove the refrigerant pressure sensor.

CAUTION:
Cap or wrap the opening of the refrigerant pressure sensor with suitable material such as vinyl tape to avoid the entry of air.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Do not reuse O-ring.
- Apply A/C oil to the O-ring of the refrigerant pressure sensor for installation.
- After charging the refrigerant, check for leaks. Refer to "Leak Test" Leak Test.
Revision: March 20122013 Infiniti JX